Requirements of American Textile and Apparel
- 产品描述
-
- Commodity name: Requirements of American Textile and Apparel
- Commodity ID: 1138434266422202368
Requirements of American Textile and Apparel
The regulations of textile and clothing in American mainly be consisted of the labeling，flammability and hazardous substances act，such as 16CFR 303 textile labeling act，16 CFR 300 wool product labeling act，16 CFR1610 Textile and Clothing flammability，16 CFR1615&1616 Children’s sleepwear flammability and CPSIA，the detail information as bellow：
Regulation
Requirement
16 CFR 303 Textile labeling Act 16 CFR
300 Wool product labeling Act
Label on product shall provide all required information in theproper format as applicable under the Textile Fiber ProductsLabeling Act or the Wool Products Labeling Act, including but not limited to: Name of manufacturer or other registration number (RN# or WPL#).
Country of Origin.
Generic Name and Percentage of all fibers in product.
Size.
16 CFR 1610 Textile and Clothing flammability
Plain surface textile fabric
Class 1:Burn time is 3.5 seconds or more ACCEPTABLE
Class 2: is not applicable to plain surface textile fabrics
Class 3: Burn time is less than 3.5 seconds. NOT ACCEPTABLE.
Raised surface textile fabric
Class 1:(1)Burn time is greater than 7.0 seconds; or (2) Burn time is 0–7 seconds with no base burns.
Exhibits rapid surface flash only. ACCEPTABLE
Class 2: Burn time is 4–7 seconds (inclusive) with base burn . ACCEPTABLE
Class 3: Burn time is less than 4.0 seconds with base burn.NOT ACCEPTABLE.
16 CFR 1615&1616 Children’s
sleepwear flammability
The average char length of sample does notexceed 17.8 cm (7 in) and no individual specimen has a
char length of 25.4 cm (10 in)
CPSIA
1.All accessible paint and other similar surface coating materials (determined both before and
after use and abuse testing) shall comply with the lead content provisions of16 CFR 1303. Max. 0.009% (90 ppm) total lead content by weight. All accessible substrates must not contain morethan the specified amounts of total lead as 100 ppm.
2.A permanent ban on the manufacture for sale, offer forsale, distribution in commerce, or importation of any children’s toy or child care article that contains concentrationsof more than 0.1 % of the following phthalates: DEHP: di-(2-ethylhexl) phthalate, DBP: dibutyl phthalate, BBP: benzyl butyl phthalate.
3.An interim ban on the manufacture for sale, offer for sale, distribution in commerce, or importation of any children’s toy that can be place in a child’s mouth or child care article that contains concentrations of more than 0.1 % of the following phthalates individually: DINP: diisononyl phthalate DIDP: diisodecyl phthalate DnOP: di-n-octyl phthalate.
No.
Physical Testing Items
Regulations/Standards
1
Dimensional Stability and Appearance
ASTM
AATCC
2
Colorfastness
3
Strength Tests
4
Structure Analysis
5
Performance Tests
6
Fiber Composition
MESSAGE
If you are interested in our product, please leave your email and we will contact you as soon as possible. Thank you.
Recommended products
Address：10/13F，Kechuang Building A,No.586，Xihuan Road，Keqiao，Shaoxing city，Zhejiang province
Email：fanny@qits.com.cn | steven@qits.com.cn
Zhejiang QIT Testing Technology Service Co., Ltd | Powered by 300.cn SEO